-
DT Swiss Installation tool for 180 Mon Chasseral non-driveside rear
Bearing installation tool for non-drive side bearings on rear Mon Chasseral wheels Please consult your wheel's service manual before ordering this tool to see whether it is required- £34.31
£39.99- £34.31
- Unit price
- per
Save £5.68 -
DT Swiss HWAXXX00S3170S Rear hub spacer, non-drive side for 11-speed, 130 mm, DiCUT
Genuine DT Swiss replacement part Drive side spacer for 130 mm DiCut road hub- £14.84
£17.99- £14.84
- Unit price
- per
Save £3.15 -
DT Swiss Installation cylinder for 350 / 370 front hubs
Installation cylinder for working on 350 and 370 front hubs Please consult your wheel's service manual before ordering this tool to see whether it is required- £24.74
£29.99- £24.74
- Unit price
- per
Save £5.25 -
DT Swiss Service / Upgrade Kit for star ratchet hubs 24 teeth Hybrid
Designed for DT's Hybrid E-MTB wheels, these steel 24 Tooth ratchets are super tough and ideal for use on E-bikes, tandems or any bike that sees sustained high-torque and where reliability is paramount Compatible with all DT star ratchet based hubs- £34.31
£39.99- £34.31
- Unit price
- per
Save £5.68 -
Dt Swiss Hwaxxx00S1397C End Caps For Road Front Straight Pull Single
Genuine DT Swiss replacement part Front end cap for straight pull 240 road hubs as found on RC series wheels Check DT Swiss tech documents for your hub for compatibility- £18.14
£21.99- £18.14
- Unit price
- per
Save £3.85 -
DT Swiss Service / Upgrade Kit for star ratchet hubs 36 teeth SL
The DT Swiss 36-tooth ratchet kit changes the degree of engagement of a DT rear hub from 20 degrees to 10 degrees, which results in faster engagement 36 instead of 18 steps on standard ratchet Machined out ratchets are 10 grams lighter per set...- £77.21
£89.99- £77.21
- Unit price
- per
Save £12.78 -
DT Swiss Shim Ring for Ratchet EXP hubs
Shim ring for Ratchet EXP hubs only, will not fit older designs Dimensions: Outer / Inner diameter 25.9 / 19.9 X 2.3 mm- £3.29
£3.99- £3.29
- Unit price
- per
Save £0.70 -
DT Swiss Front Wheel Kit for 110 mm / 15 mm for 110 / 20 Boost 240 EXP oversize hubs
Genuine DT Swiss replacement part Converts a Boost 20mm front hub into Boost 15 mm thru-axle Please refer to the DT Swiss Tech Book for a full chart of possible conversions for wheelsets and individual hubs- £34.31
£39.99- £34.31
- Unit price
- per
Save £5.68 -
DT Swiss Cylindrical Spring For Ratchet EXP hubs
Single cylindrical ratchet spring for Ratchet EXP hubs only, will not fit older designs- £3.29
£3.99- £3.29
- Unit price
- per
Save £0.70 -
DT Swiss Axle Spacer For Ratchet EXP hubs
Axle spacer for Ratchet EXP hubs only, will not fit older designs- £4.94
£5.99- £4.94
- Unit price
- per
Save £1.05 -
DT Swiss HWAXXX00S1545C Front hub spacer for 240 radial non-disc single
Single Q/R end cap for 240 radial front road hub Genuine DT Swiss replacement part- £18.14
£21.99- £18.14
- Unit price
- per
Save £3.85 -
DT Swiss Front axle aluminium 100 mm 17 / 55.1 mm radial
Genuine DT Swiss replacement front axlePlease see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs- £24.74
£29.99- £24.74
- Unit price
- per
Save £5.25 -
DT Swiss Shim Ring for Ratchet EXP OS hubs
Shim ring for Ratchet EXP Oversized hubs only, will not fit standard EXP or older designs Dimensions: Outer / Inner diameter 25.9 / 19.9 X 2.3 mm- £3.29
£3.99- £3.29
- Unit price
- per
Save £0.70 -
DT Swiss Axle Spacer For Ratchet EXP OS hubs
Axle spacer for Ratchet EXP Oversized hubs only, will not fit standard EXP or older designs- £4.94
£5.99- £4.94
- Unit price
- per
Save £1.05 -
DT Swiss HSBXXX00N1713S Bearing 6803 (17 / 26 x 5 mm) Stainless
Genuine DT Swiss replacement bearingPlease see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs- £42.89
£49.99- £42.89
- Unit price
- per
Save £7.10 -
DT Swiss Service / Upgrade Kit for Ratchet EXP hubs 54 teeth
DT Ratchet EXP ratchet service kit, contains both 54 tooth ratchets, the spring and a tub of DT's specially formulated molykote TP 42 ratchet grease This kit will only fit hubs and wheels using the new Ratchet EXP system, it will not work with...- £81.50
£94.99- £81.50
- Unit price
- per
Save £13.49 -
DT Swiss Ratchet freehub conversion kit for Campagnolo Road, 130 mm or 135 mm QR
Genuine DT Swiss Freehub body conversion kit, includes freehub body and drive side end cap Ratchet freehub, fits all DT aftermarket hubs and higher end wheels For lower end complete wheels please see the Pawl freehub kits, if you're not sure which type you...- £72.92
£84.99- £72.92
- Unit price
- per
Save £12.07 -
DT Swiss Ratchet freehub conversion kit for Shimano MTB, 135 mm QR
Genuine DT Swiss Freehub body conversion kit, includes freehub body and drive side end cap Ratchet freehub, fits all DT aftermarket hubs and higher end wheels For lower end complete wheels please see the Pawl freehub kits, if you're not sure which type you...- £64.34
£74.99- £64.34
- Unit price
- per
Save £10.65 -
DT Swiss Rear axle end spacer for 340 hub 135 mm Shimano left side
Genuine DT Swiss replacement part- £20.62
£24.99- £20.62
- Unit price
- per
Save £4.37 -
DT Swiss HSBXXX00N9115S Bearing 1728 (17 / 28 x 7 mm) Standard
Genuine DT Swiss replacement bearingPlease see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs- £11.54
£13.99- £11.54
- Unit price
- per
Save £2.45 -
DT Swiss Front Torque Caps for BOOST, to fit pre-EXP 240 hubs and 2014 Spline 1 wheels.
Genuine DT Swiss replacement part Converts BOOST 110 x 15 mm front hubs to work with Rockshox Torque Cap compatible forks Fits older, white 180 hubs and pre 2021, 240 hubs- £34.31
£39.99- £34.31
- Unit price
- per
Save £5.68 -
DT Swiss HWAXXX00S7112S Rear Q/R Drive Side Spacer for MICRO SPLINE
Genuine DT Swiss replacement part Drive side rear 5mm quick release spacer for Micro Spline, will fit most 240, 350 and 370 hubs Check support section of DT Swiss.com for compatability- £18.14
£21.99- £18.14
- Unit price
- per
Save £3.85 -
DT Swiss Front Torque Caps for BOOST, to fit all 350 hubs, 1700 and 1900 wheels
Genuine DT Swiss replacement part Converts BOOST 110 x 15 mm front hubs to work with Rockshox Torque Cap compatible forks Fits 350 and 370 hubs, as well as 1700 and 1900 series MTB wheels- £34.31
£39.99- £34.31
- Unit price
- per
Save £5.68 -
Dt Swiss Spc Front 180 Q/R Non-Disc Hub Spares
Genuine DT Swiss replacement part 5mm quick release spacer for non-disc 180 front road hubs, check support section of DT Swiss.com for compatability- £18.14
£21.99- £18.14
- Unit price
- per
Save £3.85 -
DT Swiss Rear spacer 240 road / 190 and 240s / FR / 440 stainless right side
Genuine DT Swiss replacement part- £18.14
£21.99- £18.14
- Unit price
- per
Save £3.85 -
DT Swiss Pawl unit retainer for Onyx hub
Genuine DT Swiss replacement Freehub part- £4.12
£4.99- £4.12
- Unit price
- per
Save £0.87 -
DT Swiss Rear axle steel 130 mm 10 / 71.2 mm
Genuine DT Swiss replacement rear axlePlease see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs- £24.74
£29.99- £24.74
- Unit price
- per
Save £5.25 -
DT Swiss HSBXXX00N2453S Bearing 6805 (25 / 37 x 7 mm) Standard
Genuine DT Swiss replacement bearingPlease see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs- £11.54
£13.99- £11.54
- Unit price
- per
Save £2.45 -
DT Swiss Ratchet freehub conversion kit for SRAM XDR, 142 / 12 mm
Genuine DT Swiss Freehub body conversion kit, includes freehub body and drive side end cap Ratchet freehub, fits all DT aftermarket hubs and higher end wheels For lower end complete wheels please see the Pawl freehub kits, if you're not sure which type you...- £72.92
£84.99- £72.92
- Unit price
- per
Save £12.07 -
DT Swiss HSBXXX00N1285S Bearing 6902 (15 / 28 x 7 mm) Stainless
Genuine DT Swiss replacement bearingPlease see the product support guide on the DT Swiss website to confirm compatibility with your wheels or hubs- £42.89
£49.99- £42.89
- Unit price
- per
Save £7.10





















